Kunshan Huapin Aluminum introduction: How to distinguish various types of aluminum plates?

Brushed aluminum plate: repeatedly use sandpaper to scrape the aluminum plate out of the manufacturing development process, the main process research workflow can be divided into deester, sand mill, washing 3 parts. In the aluminum sheet wire drawing process, the special skin film technology after the anodizing treatment can make the surface of the aluminum sheet material react to form a skin film layer containing the structural components of the metal, clearly and gradually showing each fine wire trace, so that the Chinese metal matte produces a fine hair luster.

Aluminum oxide plate: The aluminum plate is placed in a corresponding electrolyte (such as sulfuric acid, chromic acid, oxalic acid, etc.) as a research anode, under specific environmental conditions and external working current protection, analysis of the aluminum plate formed by electrolysis. The surface of the anode aluminum plate is oxidized, and a thin layer of Chinese alumina is not formed on the surface, and its thickness is 5 to 20 microns, and the oxide film of the hard anode can reach 60 to 200 microns.

Ps aluminum plate (advertising aluminum plate, also known as printing zinc plate, newspaper plate) : that is, the thickness of the printed pattern on the back is 025 or 03 aluminum plate.

Aluminum mirror: refers to the process through various methods and rolling, grinding, etc., the sheet presents the surface aluminum mirror effect.

Embossed aluminum plate can also be called aluminum embossed plate: on the basis of aluminum plate, after calendering processing and no formation on these surfaces and a variety of different patterns of aluminum plate products, the application research is more systematic, the main method is used in packaging, construction, curtain wall and other aspects.